Details
Specs
Reviews
Support
Removing pedals can be difficult and confusing but the The Filzer PW-3 15 mm Pedal Wrench is your friend. The vinyl dipped handle is comfortable. Three 15 mm slots oriented at 0º, 45º and 90º optimize orientation possibilities to provide maximize leverage. The head is made of K5 steel, which is 40% stronger than Cro-Moly. Directions for pedal removal and installation are laser etched on the back of the wrench. The right pedal turns counter clock wise to remove, clock wise to install; the left pedal (reverse threaded) turns clock wise to remove and counter clock wise to install. Avoid excessive tightening when reinstalling pedals.
- Comfortable vinyl dipped handle
- 3 pedal opening orientations (15mm) at 0º, 45º and 90º to optimize leverage
- Made of K5 steel (50-55 hardness), 40% stronger than Cro-Moly (40-45 hardness). Nickel-plated.
- Laser cut tool for accurate sizing (+0.15/-0.0 mm)
Pedal Wrench Demo
- Comfortable vinyl dipped handle
- 3 pedal opening orientations (15mm) at 0º, 45º and 90º to optimize leverage
- Made of K5 steel (50-55 hardness), 40% stronger than Cro-Moly (40-45 hardness). Nickel-plated.
- Laser cut tool for accurate sizing (+0.15/-0.0 mm)
| MEC: | Read MEC Reviews |
