The Filzer Slider Front Pannier Rack is an easy-to-install front pannier rack. The rack is designed to attach to rigid forks and for suspension forks there is a required conversion kit (FPR-1S) that must be purchased separately. With two sliding brackets, one horizontal and the other angled, you can easily adjust the height and angle of the rack to fit the fork’s braze-ons. The rack is made of high quality 6061 aluminum and the hardware is stainless steel.
- Easy to install on rigid forks with mid-fork braze-ons and eyelets at the dropouts
- Two sliders make it easy to install and adjust angle of rack
- Includes U-bolts to install on most rigid forks without mid-fork braze-ons
- Rack is made of high quality 6061 aluminum (10.5mm diameter tubing)
- Stainless steel hardware (except for U-bolts)
- Included lots of extra parts to make installation easy
- Suspension forks ALSO REQUIRE a suspension forks conversion kit - Filzer item: FPR-1S
- Maximum load: 10kg (22 lbs)
- Weight: 1kg (2.2 lbs)
- Easy to install on rigid forks with mid-fork braze-ons and eyelets at the dropouts
- Two sliders make it easy to install and adjust angle of rack
- Includes U-bolts to install on most rigid forks without mid-fork braze-ons
- Rack is made of high quality 6061 aluminum (10.5mm diameter tubing)
- Stainless steel hardware (except for U-bolts)
- Included lots of extra parts to make installation easy
- Suspension forks ALSO REQUIRE a suspension forks conversion kit - Filzer item: FPR-1S
- Maximum load: 10 kg (22 lbs)
- Weight: 1kg (2.2 lbs)
Instructions
1) To install rack, your fork must have eyelets at the dropouts.
2) Suspension forks ALSO REQUIRE a conversion kit - Filzer item: FPR-1S. (For suspension forks, you do not need eyelets at the dropouts with our suspension fork add-on kit.)
3) A parts kit is available and includes all small parts included with this rack. Filzer Item: FPR-1P.
4) The rack should fit most bikes with front disc brakes. However you may have to adjust rack fittings to accommodate for disc brake clearance.
5) The seat stay clamps' metal finish may be silver or black. For environmental reasons we are updating the finish to ED black.
