We are here to help!

www.mec.ca

Not for dZ series computers.

Zip Ties - Make sure you use thick zip ties for computer mount and sensors. If you use the thin zip ties for the computer mount and/or sensor they might not be stable.

Zip Ties - Make sure you use thick zip ties for computer mount and sensors. If you use the thin zip ties for the computer mount and/or sensor they might not be stable.

Zip Ties - Make sure you use thick zip ties for computer mount and sensors. If you use the thin zip ties for the computer mount and/or sensor they might not be stable.

- Pin retainer nut has a reverse thread

Note - these patches are designed for mountain bike tires. The patches might be a bit wide for road tires. However, if needed, you can cut them smaller with scissors to better fit road tires.

Battery warning and care

The light has an internal Ni-MH battery that holds the charge when you crank the handle. If you do not recharge the batteries regularly (every 3 months) or if you store the light in an uncharged state, the batteries will eventually no longer accept a charge. Charge and use your light regularly as you cannot replace the internal

Battery warning and care

The light has an internal Ni-MH battery that holds the charge when you crank the handle. If you do not recharge the batteries regularly (every 3 months) or if you store the light in an uncharged state, the batteries will eventually no longer accept a charge. Charge and use your light regularly as you cannot replace the internal

See the following link for FAQs.

See the following link for FAQs.